| Roll | Produktionsingenjör |
| Kompetensområde | Tekniskt arbete |
| Startdatum | 2026-06-15 |
| Slutdatum | 2026-12-31 |
| Omfattning | 100% |
| Ort | Ludvika |
| Land | Sweden |
| Sista svarsdatum | 2026-06-05 (Offerter kommer att behandlas löpande) |
| Kontaktperson | Anette Svensson (hitachi@keyman.se | ) |
| Referensnummer | #15691 |
Övergripande uppdragsbeskrivning
Description:
Manufacturing Production Process Engineering focuses on designing, developing, and implementing new or revised production processes for the efficient/economical mass production of goods including: Designing arrangement of manufacturing equipment to ensure most efficient and productive layout. Designing the sequence of production operations, specifying procedures for the fabrication of applicable tools and equipment, and adapting machinery in response to factory conditions. Conducting tests throughout all stages of production to determine control over applicable variables and troubleshooting/solving production problems. Providing guidance to product design engineering on technical specifications that will best utilize equipment and manufacturing techniques. Ensuring that production processes and procedures are in compliance with regulations
An Experienced Professional (P2) applies practical knowledge of job area typically obtained through advanced education and work experience. May require the following proficiency: Works independently with general supervision. Problems faced are difficult but typically not complex. May influence others within the job area through explanation of facts, policies and practices.
Additional Hiring Information for Supplier:
We are looking for a self-motivated and organised first-line production technician who wants to help maintain and develop the factory’s working methods and act as a role model in our improvement initiatives.
Here, you will have the opportunity to make a difference, drive your own initiatives and play a central role in our local and global improvement projects within a lean-oriented factory with high ambitions in terms of technology, quality and delivery capability.
“We are embarking on a unique growth journey where electrification and renewable energy are creating enormous global demand. With us, you won’t just be part of this transition – you’ll have a direct influence on our ability to deliver solutions for a sustainable future.”
How you will make a difference:
- Provide day-to-day support to production to maintain our production capacity.
- Play an active role in day-to-day development work through local improvement initiatives and production-related technical investigations.
- Help to develop and implement standardised and efficient working methods in the factories.
- Carry out production analysis, time studies and balancing to create stable and even flows on production lines.
- Opportunity to participate in, or lead, smaller projects.
- Initiate and implement your own improvement proposals that strengthen production work and create long-term value.
- Work closely with R&D, Design, Quality and Production to implement robust technical solutions.
- Ideally, a degree in mechanical engineering or an equivalent technical background.
- Preferably at least 1–2 years’ practical experience in a production environment.
- Experience as a maintenance or service technician is also relevant.
- Experience of assembly, understanding of production, levelled flows, assembly processes and industrial work.
- Experience of cross-functional working.
- Experience of lean working, process development or production optimisation is an advantage.
- Experience of manufacturing execution systems (MES) and ERP systems (SAP) is considered a plus.
Levels with numbers (1-5): Increasing experience from 1=Very Junior up to 5=Very Experienced
Levels with letters (A-F): Increasing experience from F=Very Junior up to A=Very Experienced
Skallkrav
IMPORTANT Carefully read the full description of the role, requirements and specific qualifications wanted, areas of responsibility, background requested and additional employment information for the supplier to ensure that your set of competencies matches the role.
Fluency in both written and spoken English is mandatory.
IMPORTANT Confirm that your offered price is a gross price according to the information below. From this price the fee (4.23%) will be deducted.
Attach only ENGLISH CV in Word format under the Documents tab. PLEASE REMOVE company logos and photos. The CV is an important part of the evaluation of the consultant. It must clearly show that the consultant has the competence and experience required for the current assignment.
Provide consultant’s Date of Birth in the following format: YYYY – MM – DD by writing it in the Comment field after selecting Yes.
Provide consultant’s Nationality by writing the Nationality/Country holding Passport, in the Comment field after selecting Yes.
Provide consultant’s Gender by writing one of the following alternatives; Female / Male / Prefer not to answer; in the Comment field after selecting Yes.
The consultant is located in Sweden
Börkrav
Övriga krav
Offer for this assignment must be sent via KeySourcingTool. Replies via email will receive limited feedback.
Please describe briefly in ”Comments” for the various requirements how the consultant meets these.
The supplier hereby confirms that they are aware of feedback on Offers will primarily come via KeySourcingTool on the submitted offer (notification via e-mail from KST).
The supplier certifies that the company has a consulting and liability insurance that covers this type of assignment according to standards for this line of business.
In connection with a quote on this assignment, the supplier approves the terms and conditions that apply to the assignment. See text in the request and the attached documents.
The supplier confirms that the consultant is employed by the supplier company. The supplier may not offer second layer Subcontractors. This is a demand from the end customer.
The Supplier hereby warrants that all consultants provided within the scope of the Call-off Request, in accordance with the Supplier’s internal procedures applicable at any given time, have undergone customary and relevant background checks. To the best of the Supplier’s knowledge, such checks have not revealed any circumstances that would affect the Consultant’s suitability to perform the assignment
The Supplier further certifies that all information contained in each consultant’s curriculum vitae (CV), as well as any other documents provided to the Client, is, to the best of the Supplier’s knowledge at the time of submission of the tender or call-off, are correct, complete and truthful.
Personliga egenskaper
Övrig information
PLEASE NOTE: From the offered hourly rate, the contractual fee of 4.23% (MSP 2,13% + KeyMan 2,1%) will be deducted.
If we end up in a contract the consultant must undergo a drug test before the assignment can start. The consultant then also must have a certificate for SSG-Entré and sign a NDA.
The assignment is Onsite.
For further details and conditions, see the attached documents.
- För att kunna offerera på våra uppdrag måste du vara registrerad användare i KeySourcingTool och ditt bolag måste även vara affärspartner med KeyMan (kostnadsfritt).
(Om du är helt ny användare och vill registrera dig och ditt bolag i KeySourcingTool – Klicka här)
(Om ditt bolag redan är registrerat i KeySourcingTool men behöver bli affärspartner med KeyMan – Klicka här)